Electric Wire Rope Hoist Specifications

Electric Wire Rope Hoist Specifications

Improper daily operation of Electric Wire Rope Hoist will cause casualties. Therefore, in addition to training and licensed operations in accordance with the regulations, operators of electric hoists must strictly observe the behavioral norms stipulated in the 11 operational regulations.

The mechanical, electrical, wire rope, hooks, limiter, etc.  the equipment should be carefully checked before starting.

Do not overload the lifting. When lifting, the hand should not be held between the rope and the object. Do not overload the lifting. When lifting, the hand should not be held between the rope and the object.

When lifting objects, you must abide by the safety operation rules for hooks and heavy industries. Strapping should be firm, in the sharp corner of the object should be provided with protection at the corner gap.

Use the towline switch to start the electrical switch, the insulation must be good. Press the button correctly and pay attention to the position of standing while operating.

The monorail Electric Wire Rope Hoist must slow down when the track is around the corner or near the end of the track.

Use of Electric Wire Rope Hoist can not be used frequently and repeated frequent point, otherwise it may lead to brake heat.

Tilt lifting and horizontal towing are not allowed.

It is forbidden to hang in the air for a long time to prevent the permanent deformation of the parts.

Electric Wire Rope Hoist found in the course of the failure should immediately cut off the main power supply.

After the use of Electric Wire Rope Hoist will be placed fixed, hanging to more than 2 meters.

Always check and find out the fault or potential problems in a timely manner, and record the maintenance.

See more：

http://www.nucleoncranegroup.com
http://www.nucleonoverheadcrane.com

Email:info@nucleoncranegroup.com
If you have any questions, Please don’t hesitate to contact me.