Double Girder Overhead Crane With Remote Control
Double Girder Overhead Crane With Remote Control for Steel Coils Lifting
There are two girder beams that make up the bridge, and they are supported by an end truck on each side. The winch trolley run on a rail installed above the bridge girders.
Double girder crane is recommended for heavier-duty applications where the crane has to handle heavier capacities and longer spans. It is used for either manufacturing or maintenance applications. Almost all paper mills use overhead crane for regular maintenance needing removal of heavy press rolls and other equipment.
Double girder bridge crane is applicable to the transfer, assembly, check and repair as well as load and unload at mechanic processing workshop, subsidiary workshop of metallurgical mills, warehouse, goods yard and power station.
Double Girder Overhead Crane With Remote Control
| No | Item | Data |
| 1 | Lift capacity | 50T |
| 2 | Span | 17M |
| 3 | Lift height | 15M |
| 4 | Work duty | A5 |
| 5 | Control method | Wireless remote |
| 6 | Electrical parts | SCHNEIDER |
| 7 | Lift motor | 22KW, lift speed 0.18-1.8M/Min |
| 8 | Cross travel motor | 3KW X 2, travel speed 2.4~24M/Min |
| 9 | Long travel motor | 4KW X 2, travel speed 3.3~33M/Min |
| 10 | Bus bar with accessories | 4P X 30MM2 |
| 11 | Runway with accessories | P43 |
| 12 | Control voltage | AC 36V |
| 13 | Power supply | 415V~690V/50Hz/3P |